Silicone Sealant

Product Details:

Description:
GP PLUS is a one part acetic cure silicone sealant. A strong, fast curing, low shrinkage product unaffected by rain, sunlight, snow etc. It is formulated with years of experience on a wide range of applications. It is a silicone sealant with high UV & water resistance.
Description:
GP PLUS is a one part acetic cure silicone sealant. A strong, fast curing, low shrinkage product unaffected by rain, sunlight, snow etc. It is formulated with years of experience on a wide range of applications. It is a silicone sealant with high UV & water resistance.

Product Details:

Product:
Fix ALL Crystal is a crystal clear, neutral, elastic, single component sealant/adhesive based on MSPolymers®.
Characteristics: 
- Completely transparent
- Outstanding bond strength, mostly without primer, on nearly all surfaces, even moist.
- High performance mechanical properties
- Very easy to tool and finish
- Good extrudability even at low temperatures
- Ecological advantages
– free of isocyanates, solvents, halogens and acids
- Minimal health and safety considerations
- Can be painted with water based paints and a number of other systems (preliminary test required)
- Permanently elastic after full cure 
Applications:
All interior and exterior bonding and sealing applications Transparent and elastic bonding in many different construction and building applications Interior bonding of glass and other transparent materials (cannot be used as a glazing sealant). 

Product Details:

Description:
GENERAL PURPOSE - GP is a high-quality, elastical one-component joint sealant based on silicones.
Characteristics:
- Very easy application
- Permanent clear, UV-resistant
- Stays elastic after curing
- Very good adhesion on many materials
- Typical acetic smell
- General sealing for automotive applications
Applications:
Building- and construction joints
Glazing and connection joints
elastic joints in coldstore and container applications
Sealings in air condition systems
General sealing for automotive applications.  
Packaging:
Colour: clear, white, black, grey Packaging: cartridge 260ml 
Shelf life and storage:
12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between +5°C and +25°.
Health- and Safety Recommendation:
Apply the usual industrial hygiene. Consult the label for more information.
Surfaces:
Type: all usual surfaces, except PVC, PE, PP, PTFE and bituminous surfaces State of Surface: clean, dry, free of dust and grease Preparation: apply Primer 150 for applications on porous surfaces – no primer required for non porous surfaces. We recommend a preliminary compatibility test. 
Joint Size:
Minimum Width: 5mm
MaximumWidth: 30mm
Minimum Depth: 5mm
Recommendation: 2 x depth = width

Product Details:

Product:

Fix ALL High Tack is a high quality, single component joint sealant with high adhesive strength and initial tack. It is based on MSPolymer®.

Characteristics:

- High initial tack reducing the need for initial support.
- Fast curing, quick build
-up of end strength, high sheer strength after full cure (no primer) - Easy to apply and easy to tool and finish
- Remains elastic after curing - No odour
- Does not contain isocyanates, silicones nor solvents
- Paintable with all water based paints
- Good colour stability, weather and UV resistance - Good adhesion on wet substrates  

Applications:

Sealing and bonding in the building and construction industry. Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc). Elastic bonding in vibrating constructions. 

Packaging:
Colour: white, black, grey, brown, beige, alu grey
Packaging: cartridge 290ml 

Shelf life:
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.

Resistance to chemical agents:
Good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis Poor resistance to aromatic solvents, concentrated acids, chlorinated hydrocarbons.

Joint dimensions:
Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint

Application:
Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix ALL Cleaner immediately after application and before curing Tooling: with soapy solution before skin formation Repair with: Fix ALL High tack 

Product Details:

Description:
Neutral+ silicones sealant is cost effective, multipurpose, neutral cure silicone sealant.
Applications:
McCoy Soudal Neutral+ silicones sealant will bond to make strong weatherproof seal on most common building material like glass, concrete, aluminium, brick, steel, ceramic, plastic and most porus & non-porus substrates.

Additional Information:

• Packaging Details: cartridge 270ml

Product Details:

Product:
Soudaflex 621 has been specially developed for Indian subtropical conditions after a decade of research, practical application understanding of Indian climate conditions, it is most suitable in high temperature & extreme humid conditions.
Soudaflex 621 is specifically designed for sealing application in the Bus & Coach, Truck, Earth Moving Equipments, Tractor, Forklift, OEM, Repair Auto After Markets, Metro, Railway, Defence, Aviation, Marine & various other commercial and industrial vehicles.
It bonds a variety of material like are FRP, GRP, timber, plywood, metals, particularly aluminium (including anodized components), sheet steel (including phosphated, chromated and zinc-plated components), coated metals and paint coatings (two-part systems), ceramic materials & plastics.

Product Details:

FEVISEAL NEUTRAL PRO a one part Neutral Cure Silicone Sealant is a non-slump, moisture-curing RTV (roomtemperature vulcanizing) that cures to form a tough, low modulus rubber for long-term flexibility and durability.The neutral curing mechanism is ideally suited for use in confined work areas since no objectionable odours areevolved.

Typical Applications

Ideal for sealing glass, aluminium, non-oily wood, brick, concrete, steel, ceramic, selected plastics, etc.

Sealing of aluminium/glass window frame joints, fixing glass into aluminium frames in lieu of rubber beading.

Features

 Ready to use - No mixing is required, directly applicable through cartridge.

Solvents free – No solvent hence safe to use.

Sagging – It is completely non-sagging in nature.

 Flexibility – Tough & flexible after curing so performs well during expansion & contraction.

 Curing – Cures by moisture absorption from air at ambient temperature & relative humidity.

 Service temperature – From 40C to 150C.

UV resistant - Good UV resistance & insulation properties.

 Self priming - No primer is required when sealing joints in glass, ceramics and vitreous surfaces.

Anti fungal.

Packaging

280 ml plastic cartridge with separate nozzle. Available in White, Clear & Black

Theoretical CoverageOne 280 ml; cartridgesWill cover 5 mm width x 5 mm depth joint = 11.2 linear metre10 mm width x 10 mm depth joint = 2.8 linear metre.

Shelf LifeShelf life is 12 months from the date of manufacturing. The material should be stored in cool and dry place.

Product Details:

Resibond SL Red is a specially devloped oxime cure silicon sealant for high temprature & heavy duty applications. it replaces almost any gasket used in automobile & engineering applications. the gasket made with Resibond SL Red resists cracking , shrinkage & migration cause by thermal cycling. pre cut gasket can be coated with Resibond SL Red to increase reliability temperature stalility:- -35c to 310c (intermittent)

Application : 
Surface to be bonded should be clean , dry and free dust , oil & grease. pirece the tube using reverse of the cap. after application replace the cap immeditely gets gelled on the nozzle it can be removed with sharp tool or pin.