Anerobics & Cynoacrylate Adhesives

Product Details:

ABOVE PRICE IS INCLUSIVE OF GST @ 18%

DESCRIPTION:
Fevicol ANR 124 is a high strength anaerobic adhesive ideally designed for secured locking of studs. Fevicol ANR 124 enables faster installation of studs. 

PRODUCT FEATURES:
Single component 
High Strength 
Solventless 
Fills gaps up to 0.25 mm  Good resistance to all usual fluids, gases, chemicals
Temperature resistance up to 150 oC
 Prevents thread corrosion.

APPLICATION AREAS:
 Fevicol ANR 124 is recommended for securely locking of studs such as anchor studs and larger diameter studs. It is suitable for high strength thread locking applications. 
METHOD OF APPLICATION:
1. Surface Preparation: Clean the metal surface with clean cotton cloth to remove dust and with solvent to remove oil, grease etc. Degreasing solvent like Trichloroethylene can be used to remove oil and grease effectively..
2.Apply Fevicol ANR 124 to the metal surfaces uniformly in sufficient quantities by squeezing.
3.Assemble uniformly so that no air bubbles are trapped. Ensure that quantity of the material is sufficient.
DISASSEMBLY OF ADHESIVE BONDS:
Parts assembled using Fevicol ANR 124 can be disassembled simply by using ordinary tools. 
CLEANING OF TOOLS:
Tools can be cleaned by Solvents like Acetone immediately after use.
HANDLING:
 Fevicol ANR 124 is non-toxic.
 A soap water wash after handling is sufficient.
 For details please refer to our MSDS. 

Product Details:

Product:

Fix ALL High Tack is a high quality, single component joint sealant with high adhesive strength and initial tack. It is based on MSPolymer®.

Characteristics:

- High initial tack reducing the need for initial support.
- Fast curing, quick build
-up of end strength, high sheer strength after full cure (no primer) - Easy to apply and easy to tool and finish
- Remains elastic after curing - No odour
- Does not contain isocyanates, silicones nor solvents
- Paintable with all water based paints
- Good colour stability, weather and UV resistance - Good adhesion on wet substrates  

Applications:

Sealing and bonding in the building and construction industry. Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc). Elastic bonding in vibrating constructions. 

Packaging:
Colour: white, black, grey, brown, beige, alu grey
Packaging: cartridge 290ml 

Shelf life:
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.

Resistance to chemical agents:
Good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis Poor resistance to aromatic solvents, concentrated acids, chlorinated hydrocarbons.

Joint dimensions:
Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint

Application:
Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix ALL Cleaner immediately after application and before curing Tooling: with soapy solution before skin formation Repair with: Fix ALL High tack 

Additional Information:

• Packaging Details: 10 PACK OF 20 GM / BOX

Product Details:

It is a Heavy duty, Fast curing, high strength anaerobic retaining formulation ideally designed to bond and retain cylindrical parts such as shafts, gears, pullys, Where maximum strength is required with higher gap filling ability. It is designed for cylindrical parts where consistent clean surface cannot be Maintained.
Features:
Excellent resistance to Dynamic, Axial & radial loads.
Excellent resistance to all usual fluids, oils , gases, chemicals
Temperature resistance upto – 50 to 1500C.
Prevents fretting corrosion
Dampens vibration, shock & impact loads
Allows uniform load distribution -Eliminates interference fits
Application:
Retaining of cylindrical parts such as Bearings, bushes, Gears , Pullys, locking bushings and sleeves into housing & on shafts, etc
Some typical applications include retaining of bush in timing cover (oil impregnated bushings into housings), to retain speedometer drive housing etc.